CMT33C 33mm current clamp

Description

THE CMT33C

The CMT33C accessory clamp is designed for use with the Circuit Mapper System (CMT24DS, CMT42DS and CMT84DS).

HOW IT WORKS

The CMT33C accessory clamp plugs into a port on the Circuit Mapper Transmitter just like the yellow mini-clamps provided with the Circuit Mapper System. The CMT33C allows for inductive coupling to a wire or cable up to 33mm O.D. or about 1500MCM whereas the yellow mini-clamps provided with the Circuit Mapper accommodate up to a #6AWG wire.

CMT33C  SPECIFICATIONS

POWER:
Powered from the Circuit Mapper Transmitter, no additional batteries needed

CLAMP SIZE:
33mm I.D. (1.25in.) (appx. 1500MCM)

OPERATING TEMPATURE:
0º F – 120º F (-18ºC -50ºC)

SIZE:
4.5” x 2.125” (114mm x 54mm)
30″ (762mm) long cord with 1/8″ male adapter (ring tip)

California Prop 65 Warning
WARNING:This product contains a chemical known to the State of California to cause cancer.
WARNING:This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
WARNING:This product can expose you to chemicals including [name of one or more chemicals], which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov