[

Circuit Mapper System

(7 customer reviews)

$1,269.00$2,179.00

 

CMT24DS/CMT42DS/CMT84DS

  • First-of-its-kind device that maps branch circuits of wiring systems concurrently with a single transmitter and receiver.
  • Eliminates the need to trace individual circuits one at a time, greatly improving branch circuit tracing efficiency.
  • Provides a full digital LED readout – no more manual adjustments.
  • Features a non-contact setting which allows signals to be read through wiring insulation, without direct electrical contact.
  • Designed for use on both energized and dead systems.
  • Accomodate up to #6AWG wire using yellow CTs (included).
  • 33mm clamp accessory available for larger wires.
  • Additional CMT2R receivers can be used simultaneously (sold separately).
  • * Comes with 24, 42 or 84 yellow CT clips (3 shown).

2 Year Limited Warranty Check out our new demo video!


Download Product Flyer
Download Product Manual
Download White Paper Article
Use the ROI calculator to see how much you can save

SKU: CMS Category:

Description

THE CIRCUIT MAPPER SYSTEM – CMT24DS/CMT42DS/CMT84DS
The revolutionary Circuit Mapper System from TASCO maps all branch circuits quickly and easily. Poorly labeled breaker panels are an unfortunate fact of life, but they don’t have to hold you up. The Circuit Mapper System enables you to work quickly and accurately. This branch circuit identifier completely maps all circuits and breaker connections from a single breaker panel. Its digital output shows the complete circuit you are testing. You can map a full breaker panel all at once with this branch circuit tracer.

Forget about the LEDs and confusing displays that come with a conventional electrical circuit tracer. The Circuit Mapper System comes in three models. The CMT24DS maps a 24-circuit panel, suitable for residential or smaller buildings. The CMT42DS maps a complete 42-circuit breaker panel common in most new residential or light office space. The CMT84DS maps 2-42 circuit panels in the same panel room or can even map 2-42 circuit panels on different floors at the same time. The Circuit Mapper System has several clear benefits over a conventional electrical branch circuit identifier. It can save immense amounts of time and will quickly pay for itself. The unit eliminates the mistakes that can occur with a competing electrical wiring locator.

HOW IT WORKS
Each of the clamps connected from the transmitter around a conductive circuit induce a coded signal modulated at 166KHz and 250KHz.  There is a unique code for each of the branch circuits.  The receiver is able to measure the signal on a conductor when the probe is inserted to the outlet.  Because of the unique frequency and code of the transmitted signal, the receiver is able to determine the strongest signal at any given outlet or lightswitch and display that reading to the user.


In a nutshell, the TASCO Circuit Mapper System will enable you to do better, more accurate and more efficient work. In addition, you can count on TASCO to provide unrivaled support for this electrical wiring tracer. Help is just a phone call away, and one call is all it usually takes to solve a problem. In the unlikely event that the Circuit Mapper System isn’t the right tool for you, TASCO will take it back with no hassles. TASCO has provided dependable tools to the trade since 1986.


CMT24DS / CMT42DS / CMT84DS  SPECIFICATIONS

RECEIVER CMT2R

POWER: Standard 9 VDC Alkaline battery (Included)

CURRENT DRAW: 35 mA avg.

SIGNAL RECOGNITION: Digital Pulse Code

OPERATING VOLTAGE: 0-600 VAC/VDC

OPERATING TEMPATURE: 0º F – 120º F (-18ºC -50ºC)

SIZE: 6.5” x 2.7” x 0.9” (105mm x 69mm x 23mm)

TRANSMITTER  CMT24DT / CMT42DT / CMT84DT

POWER: Standard 9 Volt Battery (Included)

CURRENT DRAW: 90 mA avg.

FREQUENCY TRANSMITTED: Modulated 166KHz, 250KHz

OPERATING TEMPATURE: 0º F – 120º F (-18ºC -50ºC)

SIZE: 9.0” x 3.0” x 1.2” (229mm x 76mm x 30mm)

California Prop 65 Warning
WARNING:This product contains a chemical known to the State of California to cause cancer.
WARNING:This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
WARNING:This product can expose you to chemicals including [name of one or more chemicals], which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Additional information

Weight 6 lbs
Dimensions 12 × 10 × 7 in
Circuit Model

24, 42, 84

7 reviews for Circuit Mapper System

  1. Cadpoint-Senior Member

    Stop Messing around and get the Tasco CMT42S or the CMT24S!

  2. McCaa

    This is the best investment I have ever made. I can map an entire house in less than 30 min. Customers love it too.

  3. E Simmonds

    Your product really does work good! It has impressed the hell out of all of us.

  4. John A

    Guys sure love it. So does our customers. I has been put to good use.

  5. Mike

    We really like your testers. It works really really well.

  6. Randy Allen

    for gods sake, just buy it. you can thank us later.

  7. Steven D.

    If tracing and mapping wiring systems is in your job description this is a must have tool. I thought the price was a little steep until I used it. It will pay for itself multiple times over and save me miles of footsteps. Thanks Tasco for a great tool!

Add a review

Your email address will not be published. Required fields are marked *