|
|
|
![]() |
Only $1,199.00
|
| The Buried Line Locator uses new technology that performs the functions of more expensive locators at a lower cost. The design allows the unit to be far lighter, yet still have better accuracy and definition. The transmitter uses a lower current output than competing units and a frequency that is more finely tuned. This combination is less likely to disturb lines that have equipment connected, and allows both transmitter and receiver to operate on standard "AA" size batteries. Microprocessors have been used in this product to increase simplicity of use. The product is easy to understand with a shorter learning curve than traditional locators. |
| BURIED LINE LOCATORS FAQs Sometimes
I need to scan an area before digging. Do I have to
trace one line at a time? I don't always know where the
line originates so I don't have a connection point. The transmitter uses "AA"
batteries, will it still send as strong a signal as
competing units with more powerful batteries?
|
Transmitter |
|
| Operating Voltage | 0-600 Volts AC/DC |
| Current | 13MA (open line)/150MA (live or shorted line) |
| Frequency | 32.7 KHz |
| Operating Temperature | 0º F to 120º F (-17º to 50º C) |
| Size | 7.5" x 4" x 2.1" |
| Power | 6 Volts DC (4 "AA" alkaline batteries included) |
| Weight | 1 lb. 2 oz. with batteries and clamp |
| Receiver | |
| Power | 6 Volts DC (4 "AA" alkaline batteries included |
| Depth Range | To 15 feet / .1 foot increments |
| Size | 5¼" x 2¾" x 1" |
| Passive Trace Frequency | 14-22 kHz |
| Operating Temperature | 0º F to 120º F (-17º to 50º C) |
| Size | 4.1" x 8.5" x 38" (shaft fully extended) |
| Weight | 1 lb. 2 oz. with batteries |
Warranty: Two years factory repair or replacement |
|
Optional depth reading in meters available |
|
![]()