BLL2-10W

    High Performance
   Utility Locating
    
Toll Free 1-800-999-9952






 

 

 

The NEW BLL2-10W Utility Locator 
 

BLL2-10W
$1699.00

 

Made in U.S.A.
Unconditionally Guaranteed

TRACES   PIPE, CABLE,CONDUIT AND ELECTRICAL LINES UNDERGROUND.
MEASURES   DEPTH TO 15 FEET.
LIGHTWEIGHT  RECEIVER IS EASY TO CONTROL.
LCD and LED    SIGNAL STRENGTH DISPLAY FOR UTMOST ACCURACY.
PASSIVE MODE   LOCATES LINES WITHOUT TRANSMITTER USE.
DUAL FREQUENCY
FOR OPTIMUM LOCATING REGARDLESS OF ENVIRONMENT.
10 WATT TRANSMITTER   CREATES STRONG SIGNALS OVER LONG DISTANCES.
AUTO GAIN    ELIMINATES MANUAL NEED FOR SIGNAL ADJUSTMENTS.

 

WHY THE UTILITY LOCATOR?

The Buried Line Locator uses new technology to perform functions of more expensive locators at a lower cost. This design allows the unit to be far lighter, yet still have better accuracy than competing models. The transmitter offers two frequencies and three output power settings, allowing optimal performance for all locates. It also uses a long life rechargable battery with both wall and automobile charge capability. Microprocessors have been used to increase simplicity of this product. The BLL2-10W is easy to operate and has a shorter learning curve than traditional locators.

 

PRODUCT FEATURES

The receiver display indicates signal strength, depth, low battery and mode setting. If signal is lost, the auto gain may be reset at any time with the “signal reset” button. This will immediately allow you to re-locate the line. The passive mode setting will locate electrical, CATV and telephone lines without transmitter signal. The unique audible tone is used for quickly tracing lines. The LED & LCD displays are used to pinpoint exact line location and depth measurement.

The transmitter induces a unique signal onto the line or conduit being traced. It can be connected to the line by clips leads, clamp or inductive coupling. Inductive coupling sends the signal to the line so there is no physical connection to the conductor. The transmitter indicates signal strength, low battery, power and charging.
Set includes receiver, transmitter, carry case, batteries, clamp, ground stake, chargers and instruction manual.

Set includes receiver, transmitter, carry case, batteries, clamp, ground stake, chargers and instruction manual.
 

BLL2-10W  SPECIFICATIONS

TRANSMITTER

Active Frequencies: 8.3 kHz and 33.3 kHz
Battery: Rechargeable Gel Cell Sealed Lead Acid Battery
Dimensions: 9” W x 6” H x 6 ” D
Operating Temperature: -17 C to 60 C (0 F to 120 F)
Battery Life: Up to 40 Hours @ 1.5 Watts, 20 Hours @ 5 Watts, 10 Hours @ 10 Watts
Output Power: 1.5 Watts, 5 Watts, 10 Watts
Weight: 7 lbs

RECEIVER

Accuracy of Depth: 10% +0.2’
Active Frequency Mode: 8.33 kHz and 33.3 kHz
Battery: 4 1.5 Volt batteries (AA)
Depth Measurement: .01’ to 15.0’
Dimensions: 29 ” Length, 4 ” Width
Operating Temperature: -17 C to 60 C (0 F to 120 F)Battery Life: Up to 60 hours
Passive Mode: 50/60 Hz +
Signal Strength Measurement: 1 to 99
Trace Accuracy: Within 1” per foot of depth
Weight: 2 lbs with batteries
 

                       

                                                                 Top of Ins Page.gif (1594 bytes)